NC-table (NC-tisch)

  • On my 500C I have the 400 mm dia NC-table. (B axis.)


    When starting the machine you do the reference search etc etc.


    The B-axis function is not always something you use. And if you have something “big” in the machine, the B-axis ref/homing can be a real problem. If, let’s say, you stop machining for the day and like to continue the next. Having both parts/stock and fixtures spinning around, trying to knock everything in its way down, including the machine itself, can be “interesting”. :fearful_face:


    What’s the best and most convenient way to turn the B-axis off, after of course tramming it in, and then keeping it locket?

    Is it as simple as set “Enable axis” MC to 0? (Is there even one?)

    Or is it more involved, starting out with setting number of axis and then change other MC as well?


    Thanks in advance!

    Andreas

    • Offizieller Beitrag

    you could do a lot,


    1. you could change the reference point in you MC's so that the B-axis only references in a small window.

    2. you could deactivate the 4. axis in the MC's so the machine does not know that there is a 4. axis

    3. do not turn off the machine so you need no reference drive

    4. you can change the MC's so you do not do a reference drive in this axis .


    thats all very hypertheoretical but PdVgA will know it better .


    Helmut, weiß nicht wie fit dein Englisch ist, wenn du willst kann ich das dann übersetzen, er fragt eigentlich nur ob er die 4. achse deaktivieren kann, wenn er ne große Aufspannung auf dem Tisch hat die crashen würde bei einer Referenzfahrt.

  • Dieses Thema enthält 5 weitere Beiträge, die nur für registrierte Benutzer sichtbar sind, bitte registrieren Sie sich oder melden Sie sich an um diese lesen zu können.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!