Hi Marco,
Thanks for update. This made me ligthtly woryed, as axis drive modules indication lights are on.
Hi Marco,
Thanks for update. This made me ligthtly woryed, as axis drive modules indication lights are on.
Hi guys,
Then switching on mashine I beleve all Indramat drives have to be powered?
Or some start up after reset?
Accordingt the drawing fault 27 should be Remote control E-stop.
But it is 100%. same as one on main control pannel and on the back.
Limit switches are not activated, circut is closed.
Once "START" and "CLEAR" are pressed on main pannel contactor 3K2 closes and safety circut relay 6A2 activatig.
Once "CLEAR" is released fault on ERR I5 comes back on the screen.
here is the pic of my Eplan.
I'll make full kopy later.
Hi Florian,
Jes it is from E stop on remote controller. I checked continuity from wire 1 on Blindsteckerx123 all the way to contact 27 line
x-222 it is closed.
I tryed to start up the system with" rotary clamp"
Switch in open position, solenoid valve activates, but pump sounds like it is jammed.
May it ne the temperature? It is 12C⁰ in workshop.
Thanks for your effort.
I'll have a look tomorrow after work. Still have a plan to scan E drawings and iff its any use paste it in forum library.
P.s.
E stops were first thing I checked once trying to start it up. Had a bad experiance with this in the past 😁
Hi Florian,
All lubrication tanks topped up.
Indicator on the back says fault 27.
Hi Florian,
Thanks for repply.
I updated my signature, so it should be ok this time
I replaced the battery as old ons had only 1.6V left. Tiped in all Constants from the list. Now all the checks pass OK, the only Err code left is I- 05.
All drives are pressent XYZB.
Hydraulics do not start. If I try to hold start button and Clear fir the same time the Y axsis shortly creeps in negative direction. Checked with dial indicator.
Hi guys,
I finaly baugt my 500 E2. Managed to reenter constsnts manualy from printout list I found in the manuals. But once I start the mashine screen shows only x and y axis?
Thank you.
Thanks Paul.
Hi people,
Iwent threw all net and basicaly post processor for philips 432 culd be found only in fusion 360.
Im using Solidworks and Art cam.
Maybee somebody already have a solution to this?
All electrical equipment runs on smoke, once you let it out it stops working. 😉
Hi Florian,
Yes, data cable is with computer. Now, with all this help I'm sure I can go for it and it will run. Earlier or later
And in worst case I can allwais retrofit it as long as mashine is in good shape.
WOW Florian,
Thats a Service. Answering to your question, No, I do not know how to transfer data to the mashine.
I will contact seller tomorow with my offer on this unit. Try to get the price down.
I would love to go there on a weekend and try to fire it up again, but its 4 hour drive one way and they do not work on weekends.
Iff he wont agree, probably would be better to purchase working mashine from Germany? Found one at training workshop in Mittelweg, Hamurg.
It is 600E.
Thank you !!!
hi, finaly git the rest of the info.
Maho MH 500 E2. Soft 6702.700/05. E-200023
Mashine Nr. 53822
Does anyone have constant list and electrical drawings?
Didnt find it in the library.
Well it is the first mashine I'm aiming to purchase in such a great shape. Usualy after a purchase I spend 3 to 12 months to restore equipment to atleast to my standarts if not to ful factory specs 😁
Hi guys,
Is there any real difference betwean these 2 mashines?
I uderstand, that size is the most obvious.
Considering parts, like one modell is way more popular and easier to get spares.
500E2 has the option for main table to be tilted in X axsis. Is it the same on 600e?
Thanks for feedback.
Hello guys,
I found nice mashine for purchase localy in Lithuania, but after a inspection find out that it is not running. Comes upp with all list of Err codes.
In order to continue with the purchase I would like some help and advise.
Price asked is 5000, but it has no documentation and owner is not willing to go down on price. As I see mashine is in very good state and has last inspection carried out in 2018.
New remote controll and spindle motor fitted.
Mashine was purchased obout a year ago and stand still with no power connected. So I guess memory battery will be dead and mashine constants will be gone.
I will post all pictures I have , for your judgement and advice.
As I could see computer is connected and owner has some floppy drives with it, but nothing mentions manuals or wiring scematics. And i think I saw paper punch tape in the wiring cabinet.
20220923_093725.jpgIMG_49491.jpgIMG_49481.jpgIMG_49471.jpgIMG_49451.jpg20220923_101617.jpg20220923_093436.jpg