IMG_20220120_215834.jpgHello everybody,
Can you please tell me what is this board for. It is connected on servo amplifier, and input from control is connected to it. All other Mahos that i own dont have that.
IMG_20220120_215834.jpgHello everybody,
Can you please tell me what is this board for. It is connected on servo amplifier, and input from control is connected to it. All other Mahos that i own dont have that.
Das ist ein Dreifach-Differenzverstärker. Für das Einachsantriebsgerät gibt es auch eine 1-fach-Platine. Die Sollwertspannung +-10VDC aus der Reglerkarte der CNC wird Massefrei auf den Eingang des Differenzverstärker geführt. Vom Ausgang des Differenzverstärker geht es auf den Eingang des Drehzahlreglers vom Antriebsgerät mit Massebezug. E101 und 0VM.
Ohne diese Platine neigt der Drehzahlregler dazu, eine Asymetrie aufzubauen.
Bei den AC-Antriebsgeräten ist der Sollwerteingang bereits als Differenzeingang aufgebaut. E1 und E2.
This is a triple differential amplifier. There is also a single board for the single-axis drive unit. The setpoint voltage +-10VDC from the CNC's controller card is fed to the input of the differential amplifier without ground. From the output of the differential amplifier it goes to the input of the speed controller of the drive unit with ground reference. E101 and 0VM.
Without this board, the speed controller tends to build up asymmetry.
With the AC drive units, the setpoint input is already set up as a differential input. E1 and E2.
Translated with http://www.DeepL.com/Translator (free version)
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!