Hello .
I am seeking manuals for this machine, MAHO MH500W CNC, around 1990.
Specificaly operating/programming manuals.
https://ibb.co/JCF2WGv
https://ibb.co/dfB2TnQ
https://ibb.co/L1pdT7r
https://ibb.co/1XpCkbs
https://ibb.co/0MgP0t1
https://ibb .co/2c91d0S
275927214-3241193582783452-8882629204825252467-n.jpgIMG-20220316-100232.jpgIMG-20220316-100216.jpgIMG-20220316-100242.jpgIMG-20220316-112057.jpgIMG-20220316-112046.jpg
MACHINE PARAMETERS MH500W
SERIES 561
FACTORY_NO 53543
TABLE,NO 81178991
CONTROL 232
NO 3813898
PLC # 25013403
NC NR 24294005
DATE 11/05/90
I can see is a 232 something but I can't find any information online
I registered this machine with DMG Mori, and they registered this machine as having SINUMERIC 8xx T/M control which does not seem accurate
.
I got this machine in a non working condition, having a linuxcnc retrofit in mind but the machine is working fine after debugging some electronic issues (changed electrolytic caps) and I will like to give it a go as it is.
Especially since the Heidenhain scales have extra reference marks which work like semi-absolute position, a functionallity that I will lose with linuxcnc (but no big deal).
Thanks