Hi guys,
I finaly baugt my 500 E2. Managed to reenter constsnts manualy from printout list I found in the manuals. But once I start the mashine screen shows only x and y axis?
Hi guys,
I finaly baugt my 500 E2. Managed to reenter constsnts manualy from printout list I found in the manuals. But once I start the mashine screen shows only x and y axis?
because you dont stick to the community guidelines, I have no idea what machine with what control we are talking.
the most commonly posted sentence in this forum:
please follow the link [in my signature below] to the guideline "how to put machine details into your signature" or in german [Maschinennummer in Signatur eintragen]
I estimate it is still about the machine from your last thread
hi, finaly git the rest of the info.
Maho MH 500 E2. Soft 6702.700/05. E-200023
Mashine Nr. 53822
Does anyone have constant list and electrical drawings?
Didnt find it in the library.
please !!!! copy this in your signature:
Maho MH 500 E2 Serie 1038 Software 6702.700/05. E-200023
Maschinen Nr. 53822
to the Problem itself,
thats because your constants are simply wrong, I estimate you put in the old original constants but someone upgraded the CPM Module and the Software on the machine and that leads into an issue - but that is usually easy to fix!
please post the constants you tried to put into the machine. with maybe a hint for what software version the constants ment to be
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!